• No.31-7 Centre Plaza, Shapingba District,CQ,CN
  • 8615223801122
  • Leading Provider

    Of Oil Purification Machines

  • Certified

    ISO 9001:2009

  • Leading Provider

    Of Oil Purification Machines

  • Certified

    ISO 9001:2009

Turbine Oil Service

Home Turbine Oil Service

Contact Info

Chongqing ASSEN Power Equipment Co., Ltd.

31-7 Centre Plaza,SPB District,CQ,CN

Phone : +86 23 88703683

Email : sales@assenpe.com

Turbine Oil Service is an extremely important and integral part of the performance of a turbine and the system lubricant. ASSEN has the professional services equipment-TY Turbine Oil Purifier to support your maintenance program to increase system efficiencies and decrease maintenance costs.

 

Why do we need a oil clean system?

Oils contamination(dirt, wear particles, etc.) shortens component life due to increase abrasive wear systems have increased operating pressures and closer valve tolerances which requires the best in turbine oil services.

 

Water contamination is a serious issue in all lube systems that will cause short and long-term failures of components and reduction in the life of the lubricant. ASSEN has the professional service equipment to clean system of water contaminates. The way water co-exists in oil is essentially the same as it co-exists in the atmosphere. It starts off in the dissolved phase- a molecule that is dispersed throughout the oil. Just like water exist in the air, it is not visible in the oil, which may appear clear and bright. However, once the saturation point is exceeded, water is usually present in the emulsified phase, creating a milky or misty appearance in the oil, just like the moist air in a cool day. Free water will be collected when sufficient water is present, or when the oil has sufficient demulsibility. Because the water is typically heavier than oil, it settles under the oil, at the bottom of oil tank and oil pocket.

Water affects the basic components of the oil, promoting oxidation, viscosity increase and foaming. Water also affects the additive package by water washing and hydrolysis, resulting in the depletion of acids and additives. Water promotes rust and corrosion, and increases wear due to aeration, which results in film strength failure, hydrogen foaming and embrittlement, and steam cavitation. Finally, water is a generator of other contaminants in the oil, such as waxes, suspensions, carbon and oxide insolubles, and even microorganisms.

 

Please contact us for more details.

 

Chongqing Assen Power Equipment Co.,Ltd
error: Content is protected !!